Thermal conversion (visbreaking) of heavy Iraqi residue

A heavy Iraqi residue was thermally cracked using a soaker visbreaking process at temperatures between 435 and 480 °C, with a range of residence times of 43–109 s in the coil and 151–379 s in the soaker. The pressure was kept constant at 7 bar. Visbroken products were characterized, evaluated and fractionated into light, middle and heavy cuts. The stability of the visbroken products was compared with that of the original feedstock. Also an activation energy was calculated for the visbreaking process and related to the severity of the process. The results obtained show that the conditions used were not severe and could be applied to obtain a required conversion depending on the uses of the products.     

Weight loss, polarization, electrochemical impedance spectroscopy, SEM and EDX studies of the corrosion inhibition of copper in aerated NaCl solutions

This work reports results of weight loss, potentiodynamic polarization and impedance measurements on the corrosion inhibition of copper in aerated non-stirred 3% NaCl solutions in the temperature range 15–65 °C using sodium oleate (SO) as an anionic surfactant inhibitor. These studies have shown that SO is a very good ”green”, mixed-type inhibitor. The inhibition process was attributed to the formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. Scanning electron microscopy (SEM) and energy dispersion X-ray (EDX) observations of the electrode surface confirmed the existence of such an adsorbed film. The inhibition efficiency increases with increasing surfactant concentration and time of immersion, while it decreases with solution temperature. Maximum inhibition efficiency of the surfactant is observed at concentrations around its critical micellar concentration (CMC). The potential of zero charge (pzc) of copper was studied by ac impedance, and the mechanism of adsorption is discussed. The sigmoidal shape of the adsorption isotherm confirms the applicability of Frumkin’s equation to describe the adsorption process. Thermodynamic functions for the adsorption process were determined.     

Synchronous receiver initiated MAC protocol for long-lived sensor networks

In this paper, we discuss the design of a new Medium Access Control (MAC) protocol, SRI-MAC (Synchronous Receiver Initiated MAC), for wireless sensor networks whose goal is to extend the lifetime of the network by avoiding major energy waste causes, such as collisions, overhearing and idle listening.     

An image composition algorithm for handling global visual effects

Image composition is widely used in television and film industry to create synthetic visual effects. It requires seamless integration of different parts of two or more images into a single image. Existing image composition techniques only change the local contents of the resulting image while in many cases local changes may also require some global effects as well. For example, if the image of sun from one image is transferred to another image, the global brightness pattern should also be transferred. Unfortunately existing techniques cannot handle global effects of local content manipulations. This paper describes a novel image composition technique which captures global effects associated with a specific local content from one image and incorporates in the second image. In our proposed technique, all images are transformed to the frequency domain. The composite image is created in frequency domain by mixing different frequencies from multiple images and then transformed back to the spatial domain. We have experimented the proposed technique to shift the image of sun along with its global brightness pattern, the global effects of rain and also for transferring global texture pattern from one image to the other. In most of the cases the results produced by our algorithm appear far close to real images than state of the art existing image composition techniques.     

The impact of interaction quality factors on the effectiveness of Web-based information system: the mediating role of user satisfaction

Recently, IS researchers have focused on the assessment of Web-based information system (WBIS) at the individual level as it highly contributes to the organizations’ employees. The evaluation and development of WBIS is significantly needed because the top management is in need of justifying their costly IT investment in terms of its impacts on employee performance. For this purpose, this study is primarily concerned with the development and validation of new multidimensional instrument, and also a theoretical framework for assessing the impacts of user interface quality, online communication quality, and user satisfaction on the effectiveness of Web employee portals. The effectiveness is assessed in terms of contextual performance. In a large-scale study, a sample of 384 United Nations Relief and Works Agency for Palestine Refugees respondents are gathered in order to validate and check the reliability of the adapted study instrument. The results of validity and reliability analysis provide enough confidence to proceed toward validating the proposed theoretical framework. The results of multiple-regression analysis indicate that there is a positive significant relationship between user interface quality, communication quality, user satisfaction, and effectiveness at significance level (sig. < 0.01). As another important point, the results of hierarchical regression showed that user satisfaction has a mediating role on the relationship between user interface quality, communication quality, and contextual employee performance. The findings and implications of this research are discussed. Finally, it is expected that this study would contribute to empirical studies in the fields of IS and user behavior assessment.     

Circle-criterion Based Nonlinear Observer Design for Sensorless Induction Motor Control

This paper deals with the design of a nonlinear observer for sensorless induction motor control. Based upon the circle criterion approach, a nonlinear observer is designed to estimate pertinent but unmeasurable state variables of the considered induction machine for sensorless control purpose. The observer gain matrices are computed as a solution of linear matrix inequalities(LMI) that ensure the stability conditions of the state observer error dynamics in the sense of Lyapunov concepts. Measured and estimated state variables can be exploited to perform a state feedback control of the machine system. The simulation results are presented to illustrate the effectiveness of the proposed approach for nonlinear observer design.     

On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

Algorithms for Quantum Branching Programs Based on Fingerprinting

In the paper, we develop a method for constructing quantum algorithms for computing Boolean functions by quantum ordered read-once branching programs (quantum OBDDs). Our method is based on ˉngerprinting technique and representation of Boolean functions by their characteristic polynomials. We use circuit notation for branching programs for desired algorithms presentation. For several known functions our approach provides optimal QOBDDs. Namely we consider such functions as MODm, EQn, Palindromen, and PERMn (testing whether given Boolean matrix is the Permutation Matrix). We also propose a generalization of our method and apply it to the Boolean variant of the Hidden Subgroup Problem.     

Formation of Nanocrystalline Calcia by the Decomposition of Calcite

Formation of nanocrystalline calcia from calcite has been studied in situ via transmission electron microscopy. The crystallographic transformation occurred via two mechanisms: the first is by distortion of the cleaved rhombohedron of calcite, formed by {104} planes in hexagonal coordinates, into a cube. This produced a microstructure of oriented, elongated nanocrystals of calcia with planar boundaries. In the second mechanism, the micrometer-sized parent calcite particles broke up into nano-sized grains as the decomposition began, leading to irregularly shaped, randomly oriented nanocrystals of calcia.